Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Craftsman Weather Seal Replacement: The Georgetown Owner’s Guide
Craftsman weather seal replacement in Georgetown typically runs $150-$600 installed, depending on door width and seal type. We stock Craftsman-compatible bottom seals, threshold seals, and jamb seals on our trucks, and most replacements are finished in a single visit. If you’re seeing daylight under the door or feeling the Hill Country wind push through, the seal has likely hardened or torn.
Georgetown owners usually notice the problem first in January when a cold front rolls through, or after a hard rain leaves a dark line across the garage floor. The rubber or vinyl gets brittle from our Texas sun and temperature swings. Once it cracks, it stays cracked. We’ve replaced seals on Craftsman doors from the 1990s right up through current models - the wear pattern is the same, though the attachment style varies.
Which Craftsman Models This Applies To
Craftsman garage doors were sold through Sears and later through licensed dealers for decades, so the model range is wide. We handle seals for the traditional steel raised-panel series, the newer insulated sandwich doors, and the discontinued wood-composite lines. The critical detail is the retainer type - the metal or plastic channel that holds the seal to the door bottom.
Most Craftsman steel doors from 1995 onward use a T-style or bulb-style seal in a single-channel retainer. Older doors, and some of the economy lines, use a U-shaped retainer that takes a different profile entirely. The only way to know for certain is to pull a short section and measure the channel width, or check the door label - usually found on the interior side hinge edge. If the label’s gone, we measure on site.
We carry both OEM-compatible seals and quality aftermarket equivalents from manufacturers like Clopay and Amarr that fit Craftsman retainers precisely. Aftermarket often outlasts the original in our experience, particularly the EPDM rubber compounds rated for UV exposure. We’re an independent service provider - not affiliated with Craftsman - so we match the part to the door, not the brand to the brochure.
Signs Your Craftsman Weather Seal Replacement Is Failing
- Daylight visible under the closed door. A proper seal should make full contact with the floor across the entire width. If you can see light, the seal has flattened or shrunk and is no longer compressing against the concrete. In Georgetown, this often happens after three to five summers of UV exposure.
- Water seeping in during heavy rain. The seal’s job is to create a dam against runoff. Once the rubber hardens, it loses flexibility and gaps form. We’ve seen this especially on sloped driveways in neighborhoods like Georgetown Village, where water channels toward the door.
- Insects and dust entering the garage. A compromised seal leaves a highway for ants, scorpions, and fine limestone dust from new construction nearby. If you’re sweeping more often or finding pests, the seal is the first place to check.
- The door sounds different when closing. A fresh seal cushions the door against the floor. When it’s worn, metal meets concrete with a sharper sound. Some owners mistake this for a track or opener problem.
- Visible cracks, splits, or missing sections. This is the most obvious sign, though many seals look intact from a distance while being completely hardened underneath. We check by hand - if it doesn’t flex, it’s done.
Replacement Cost & What’s Included
For a standard single-car Craftsman door in Georgetown, weather seal replacement falls in the $150-$250 range. A double-wide door or one requiring a specialty retainer runs $250-$600. The price includes the seal material, removal of the old seal, cleaning the retainer channel, proper alignment, and testing the door cycle afterward.
What moves the number: retainer condition (some rust out and need replacement), seal type (bulb, T-style, or brush for uneven floors), and whether the door needs adjustment to sit level on the floor. We state the flat price before touching anything. No surprises on the bill, and the work is covered by our 90-Day Done Right Promise in writing.
We also carry threshold seals for the floor itself and jamb seals for the sides, if those are part of the problem. Most jobs we quote in Georgetown are finished in one visit because the parts are already on the truck.
DIY or Call Us?
A Craftsman weather seal replacement is one of the safer garage door tasks a homeowner can attempt. There’s no spring tension involved, no electrical work. If you’re handy and can kneel at the door bottom for twenty minutes, you can likely handle it.
Where DIY goes wrong: ordering the wrong seal profile (the retainer mismatch), discovering the retainer itself is rusted through, or installing a seal that’s too long and bunches at the corners. We’ve also seen doors that settle slightly and no longer sit square to the floor - a new seal won’t fix that without track adjustment.
We’re happy to talk you through what you’re seeing. Tell me what it’s doing. We’ll go from there. If you’d rather not crawl around on the garage floor, call (737) 257-5760 and we’ll quote it flat, show up when we say, and handle it.
FAQs
In our climate, a quality EPDM seal typically lasts five to seven years. The intense Central Texas sun and wide temperature swings from summer highs near 105°F to winter lows in the 20s accelerate hardening. Cheaper PVC seals may fail in three years. Call (737) 257-5760 if you’re unsure what you have - we can check on site.
No. Once the rubber or vinyl has cracked or lost its flexibility, patching is temporary at best and usually makes the problem worse by creating new gaps. Replacement is the only reliable fix. We stock the right seal for your Craftsman retainer and install it in one visit.
Most Craftsman weather seal replacements take thirty to sixty minutes, assuming the retainer is in good condition. If the retainer needs replacement or the door requires leveling adjustment, it may run closer to ninety minutes. We quote the full price upfront before starting, so you know the timeline and the cost.
Yes. We carry seals for T-style, U-style, and bulb-style retainers in standard widths for single and double doors. For less common Craftsman configurations or the older wood-composite doors, we may need to pull from our Georgetown shop inventory, but most jobs are completed without a second trip.
Written by Carl Dutton, Owner, Mainspring Garage Door Co. at Mainspring Garage Door Co., serving Georgetown and nearby areas.






Before
After
Before
After
Before
After